Western Union - 15 December 2012
- BrianMoore
- Posts: 384
- Joined: Fri Jul 03, 2009 7:05 pm
- Location: Plymouth, UK
Western Union - 15 December 2012
A short video from today's meet at Plymouth.
Thanks for watching.
Brian Moore
- BrianMoore
- Posts: 384
- Joined: Fri Jul 03, 2009 7:05 pm
- Location: Plymouth, UK
Re: Western Union - 15 December 2012
Cheers, Alan. I had a fine time, thanks, bringing each of the trains into Mike Ruby's 11th Avenue yard and indulging in lots of switching. Just as well the Proto-Police were elsewhere, as they would not have approved of an SP train headed by a long-hood-forward RS11 being switched by a... gasp... UP Genset.
Brian Moore
Re: Western Union - 15 December 2012
Thanks for sharing Brian (and the production/sound!), do you have any more 'footage' ?
John P
- BrianMoore
- Posts: 384
- Joined: Fri Jul 03, 2009 7:05 pm
- Location: Plymouth, UK
Re: Western Union - 15 December 2012
Thanks, John. There is some more footage, but it's similar. There's a load of other club and similar videos on my YouTube channel, plus lots more on Mike Ruby's:igadget wrote:Thanks for sharing Brian (and the production/sound!), do you have any more 'footage' ?
http://www.youtube.com/user/BrianXMoore?feature=plcp
http://www.youtube.com/user/mikerubynfs ... e=g-high-u
Brian Moore
Re: Western Union - 15 December 2012
Hi Brian - thanks for the links - very interesting.
It's also reminded me that I need to do a video of my RDC that I recently equipped with a QSI sound decoder (rather than Digitrax). Without wishing to hi-jack your thread, can you tell me what software you use to produce the final 'cut' of your videos for YouTube?
Thanks!
It's also reminded me that I need to do a video of my RDC that I recently equipped with a QSI sound decoder (rather than Digitrax). Without wishing to hi-jack your thread, can you tell me what software you use to produce the final 'cut' of your videos for YouTube?
Thanks!
John P
- BrianMoore
- Posts: 384
- Joined: Fri Jul 03, 2009 7:05 pm
- Location: Plymouth, UK
Re: Western Union - 15 December 2012
John,igadget wrote:Hi Brian - thanks for the links - very interesting.
It's also reminded me that I need to do a video of my RDC that I recently equipped with a QSI sound decoder (rather than Digitrax). Without wishing to hi-jack your thread, can you tell me what software you use to produce the final 'cut' of your videos for YouTube?
Thanks!
All I do is load the various raw clips onto YouTube, and use their editing facilities, which are basic enough for me to understand.
Brian Moore