Page 4 of 4
Re: 23rd Street
Posted: Mon Dec 26, 2016 11:46 pm
by Mike_R
Probably the last change to the module, I've moved the depot from under the road bridge to the corner. Having had to spread the boards for transport with signals there was now room for the depot. It looks far better here being set back further from the tracks. I reinstated the rear roof edge, never throw anything away!
The depot used be here where the small bushes are growing.
23rd Street depot relocation by
Mike Ruby, on Flickr
In its new place.
23rd Street depot relocation by
Mike Ruby, on Flickr
23rd Street depot relocation by
Mike Ruby, on Flickr
Log unloader
Posted: Mon Feb 06, 2017 9:56 pm
by Mike_R
I've added some logs and waste to the unloading platform, something for the unloader to work with.
by
Mike Ruby, on Flickr
by
Mike Ruby, on Flickr
by
Mike Ruby, on Flickr
by [url=https://www.flickr.com/photos/124268832@N07/]Mike Ruby, on Flickr
Scrap yard
Posted: Mon Feb 06, 2017 10:05 pm
by Mike_R
At the scrap yard there is now an excavator fitted with a grab. I made the grab from sheet brass, it is hung from a brass bracket that replaces the original bucket. The fingers could do with being thinner with the widest point nearer the tips, I'll try that on the two others I need for two more vehicles on my other module, 11th Avenue.
23rd Street vehicles by
Mike Ruby, on Flickr
23rd Street vehicles by
Mike Ruby, on Flickr
23rd Street vehicles by
Mike Ruby, on Flickr
Re: 23rd Street
Posted: Wed Feb 08, 2017 7:49 pm
by deanobeano
Hi Mike,
A nice rendition of a grab and with the additional activities the driver certainly now has his work cut out! - I'm assuming that, whilst I'm sure it's not beyond your capabilities, the loader isn't actually motorised!
Kind regards
Dean
Re: 23rd Street
Posted: Wed Feb 08, 2017 9:05 pm
by Mike_R
No not motorised, I do have the bits to do a working rail crane, one day!
It is fully positionable, but with no driver in the cab I should leave it parked.