Page 1 of 1

Module spec release 2

Posted: Tue Nov 19, 2013 10:06 am
by Gloriousnse
For info/feedback, please find attached release 2 of the (HO, freemo) module spec - this is the first published update since the original release back in 2011.

Thanks to Tom Winlow and the modular working group for their efforts in getting this out.

Re: Module spec release 2

Posted: Mon Jan 20, 2014 5:46 pm
by torikoos
Is there any news on the progress of this spec?
If approved, we'd need to make sure the public download link on the main website is replaced with this version, currently it is still the (official) 2011 version.

Koos

Re: Module spec release 2

Posted: Tue Apr 08, 2014 11:00 am
by Gloriousnse
Not an approved version yet. I've added a link to this thread from the website to hopefully reduce any confusion. I've not heard any negative comments about the revised version yet though...

Re: Module spec release 2

Posted: Wed Apr 09, 2014 9:42 am
by tunnelmotor
As soon as we have allowed sufficient time for members to view and comment, the BOD will ratify this draft.

Re: Module spec release 2

Posted: Wed Apr 09, 2014 11:28 am
by BrianMoore
tunnelmotor wrote:If not approved, who are you anticipating will approve it? I am not sure there is a process beyond the working group now approving any uodates to the recommended specification. I can put it to the BOD for approval if that is what we think is needed. I am inclined to place an updated version 2 on the main website as THE recommended specification.
Yes. Let's get this ratified by the BoD, ASAP. It also shows that the organisation can move and adapt quickly when it needs to.

Re: Module spec release 2

Posted: Tue Apr 15, 2014 8:40 pm
by torikoos
Agreed, if there have been no negative comments. Then by all means let's get it sorted , rather than lingering around.


Sent from my iPhone using Tapatalk

Re: Module spec release 2

Posted: Tue Jun 03, 2014 9:08 am
by tunnelmotor
There have been no comments made about the latest version of the recommended specification for HO modules. I think it is safe to asxsume that members support it. The BOD, having considered the matter at their last Meeting on 26 April 2014 and approved it subject to members' comment, therefore aiuthorise its release as the next authorised version.

Mike Arnold
Vice President

Re: Module spec release 2

Posted: Thu Jun 05, 2014 9:12 pm
by torikoos
Aside from the few responses (or absence thereof) I for one did read the whole thing and there is nothing in there that I don't agree with. All looks good to me and a logical progression from where it is now.
It helps that the spec leave plenty of room for individual choices/preferences.

Koos

Re: Module spec release 2

Posted: Sat Jul 12, 2014 10:03 am
by tunnelmotor
The new Spec has been mentioned twice in BRe-news now, May and July with no obvious reactions to it here. If no comments are posted in the next week or so i would recommend we make it the latest final version.

Re: Module spec release 2

Posted: Mon Jul 14, 2014 5:56 pm
by torikoos
I would agree Mike.

I think what's been added/changed are all either positive developments, or non-issues for me, so I'm happy with going that way.

Koos

Re: Module spec release 2

Posted: Mon Jul 14, 2014 6:56 pm
by Mike_R
tunnelmotor wrote:The new Spec has been mentioned twice in BRe-news now, May and July with no obvious reactions to it here. If no comments are posted in the next week or so i would recommend we make it the latest final version.
Plus there are modules built to it, so a bit late to change much.

Re: Module spec release 2

Posted: Mon Jul 14, 2014 7:32 pm
by torikoos
One quick one on module floor to rail height. (section 6.1)
While I feel it's tempting to just specify the 45", I would for now leave the mention of the existence of 40" in there, particularly to inform those new to the modular scene.
New modules to be build to the 45" specs, but be aware of older 40" heights, and to check with the organizer of a meet which height is being used. It might mean to build a second set of legs etc…

I think , especially in the Southwest, the uptake of 45" height has been near 99% , with older boards being converted etc, but I don't know about other parts of the country.
So for now, leave it in as a mention for Rev 2, and review the situation again if a Rev 3 is being considered. It might be a complete non-issue by then.

Koos

Re: Module spec release 2

Posted: Tue Aug 12, 2014 10:16 pm
by Gloriousnse
Released - see here: http://nmrabr.org.uk/forum/viewtopic.php?f=26&t=695

Locking this discussion topic today.