Re: Programming problem - Powercab
Posted: Wed Oct 26, 2016 11:18 am
Did you program the original loco's number with the Powercab? I have heard that one of the NCE systems has trouble with higher cv numbers but not with basic address changes.
I don't see how, unless the loco was in a consist before, but is there a consist number programmed into CV17? If so set it to 0.
Have you tried doing a reset on the program track and then see if the loco works on 3. You will lose any other cv changes made.
I don't see how, unless the loco was in a consist before, but is there a consist number programmed into CV17? If so set it to 0.
Have you tried doing a reset on the program track and then see if the loco works on 3. You will lose any other cv changes made.